长出瞳距目镜光学系统设计

Design of Optical System for Long-distance Eyepieces

  • 摘要: 为了适应军用瞄准镜的作战需求,针对传统目镜系统存在出瞳距较短、成像质量差等问题,本文设计了一款非球面长出瞳距目镜,出瞳距达到了90 mm,相对镜目距为3.3。首先,在由球面构成的折射式目镜光学系统的基础上,然后为了进一步提高目镜系统的成像质量及简化系统结构,引入非球面设计,得到了含有非球面的折射式长出瞳距目镜,由5片透镜组成。结果表明:在50 lp/mm空间频率处,采用非球面设计的长出瞳距目镜,全视场MTF(Modulation Transfer Function)均超过了0.4。对该目镜的各项公差和成像质量进行了分析,公差合理,像质优良;光学系统总长为48.3 mm,重量为129.2 g,对比传统折射式目镜,光学总长缩短了24.2%,重量减轻了35.7%,具有结构紧凑、重量轻、像质高等特点。

     

    Abstract: In view of the problems of the short pupil distance and poor imaging quality of traditional eyepiece systems, an aspheric long interpupillary eyepiece with an interpupillary distance of 90 mm and a relative lens distance of 3.3 is designed to adapt military sighting devices for combat needs. First, based on a refractive eyepiece optical system composed of a spherical surface, an aspheric design is introduced to further improve the imaging quality of the eyepiece system and simplify the system structure, and a refractive long interpupillary eyepiece containing an aspheric surface is obtained, which consists of five lenses. The results show that at a spatial frequency of 50 lp/mm, the Modulation Transfer Function (MTF) of the entire field of view exceeds 0.4 for long interpupillary eyepieces with an aspheric design. The tolerances and imaging quality of the eyepiece were analyzed; the tolerances are reasonable, and the image quality is excellent. The total length of the optical system is 48.3 mm and the weight is 129.2 g, whereby the length was shortened by 24.2% and the weight reduced by 35.7% compared with a traditional refractive eyepiece. Therefore, being lightweight, it has the characteristics of a compact structure, and exhibits a high image quality.

     

/

返回文章
返回